Tiny Home Trailers for Sale in Victoria — Australian-Made Chassis for Tiny Houses

Your tiny house is only as good as the frame beneath it. Halco Trailers supplies tiny home trailers for sale in Victoria, engineered in Warragul for the realities of Melbourne traffic and Gippsland backroads. We weld with Australian steel, match axles and brakes to your target ATM, and prepare the documentation you’ll need for registration. If you’re chasing a tiny house trailer in Melbourne or a custom tiny home chassis for a regional build, we’ll tailor the platform to your plans and payload.

Prefer to speak with an engineer? Start a spec on our custom trailer manufacturing page or request timings via the contact form.

 

Why the Chassis Matters for a Tiny House (Victoria)

The right tiny home trailer chassis carries weight safely, resists twist, and keeps relocations drama-free. Our frames pair RHS rails and reinforced cross-members with ADR-compliant braking, protected LED looms, and practical details like outriggers, tie-down points, stabiliser positions and spare carriers.

 

Build-Ready Platforms (Quoted to Your Drawings)

We don’t publish prices—every chassis is quoted to your plan, materials and target mass.

 

Compact Tiny House Trailer — Studio & Urban Footprints

Tandem-axle platform balanced for smaller layouts. Manoeuvrable in tight driveways yet stable on the highway. Ideal for studios, home offices and micro-living designs.

Standard Tiny Home Trailer — Most Popular in Victoria

The go-to tiny house trailer in Victoria. Tandem or tri-axle based on final ATM, generous outriggers for wall lines and lofts, and predictable towing across regional routes.

Large Tiny Home Trailer — Extended Living Platforms

For bigger kitchens, bathrooms or dual lofts. Heavy-duty tandem or tri-axle, extended perimeter rails, larger stabilisers and bracing—suited to semi-permanent siting with confident relocations.

Not sure which platform fits? Send drawings (PDF/DWG) on the contact page and we’ll recommend a compliant chassis configuration for your tiny home in Victoria.

 

Specs at a Glance (Typical Inclusions)

Spec Category	Typical Inclusions
Chassis & Structure	Australian-steel rails, reinforced cross-members, perimeter rails, engineered outriggers aligned to wall lines
Axles & Brakes	Tandem or tri-axle; electric brakes with breakaway matched to ATM (up to 4,500 kg)
Deck Styles	Flat bed or semi-flat bed with guards; removable drawbar available on request
Electrical Loom	Full LED lighting with protected routing and sealed connectors
Stability & Restraint	Tie-downs, spare-wheel carrier, stabiliser legs/jacking points
Finish Options	Hot-dip galvanised or industrial powder coat (environment-matched)
Compliance Pack	Prepared for Victorian registration; built to applicable ADR/VSB1 requirements
Add-Ons	Winch posts, service cut-outs, under-floor storage, toolbox mounts
Accessories	Order jacks, straps, ramps and lighting from the parts store, or book fit-ups via repairs & servicing

 

Custom Engineering for Tiny Homes

No two tiny houses are alike. We’ll align the frame to your infill, service runs and finish:

• Cross-member spacing tuned to floor build-up and insulation
• Service penetrations pre-planned for plumbing and electrical conduits
• Weight distribution modelling for tongue weight and axle placement
• Corrosion strategy (galvanised vs powder-coated) based on site and usage
• Set-down plan with stabiliser locations and bracing for long stays

Have a special brief—solar banks, off-grid tanks, fold-out decks? Outline it on the custom manufacturing form and we’ll engineer the details.

 

Lead Times & Order Path (No Public Pricing)

1. Share your plans and target ATM with our engineers.
2. Receive a line-item quote with a clear build window and milestones (no generic price lists).
3. Approve CAD drawings and pay the deposit to secure the slot.
4. Fabrication & ISO-guided QA; ADR/VSB1 documentation prepared.
5. Handover & registration support in Victoria; delivery statewide available.

Need to move materials while you wait? Short-term trailer hire in Gippsland is available via the hire page.

 

Compliance, Registration & Delivery (Victoria)

We build to the applicable ADR/VSB1 requirements for your final ATM class and supply the compliance pack you’ll need for registration. Our team can arrange onsite registration at handover (where eligible) and organise delivery across Melbourne, Warragul and regional Victoria. For paperwork and logistics, message us through the contact page.

Image Gallery